EMO带式压滤脱水机国内授权唯一总代理-上海英帅机电设备工程有限

上海英帅机电设备工程有限公司为法国EMO在国内唯一授权代理商，销售法国EMO带式压滤机及浓缩带式压滤一体机，服务电话 ， . www.ensuregroup.com.cn，

DP-10-GB-US-B
The Combined System – CC range is designed for one continuous dewatering of
sludge from small water-treatment plants urban and industrial.
This compact technique of a big simplicity of operation associates the functions of a
gravity belt thickener and one belt filter press :

Construction in stainless steel AISI 304L

Easy maintenance and supervision

Economic – Very low cost of operation

Complelety closed - Detention of smells and noise pollutions

Compact design for real space saving
COMBINED SYSTEM OMEGA CC
Technical data
Installations
With 20 years experience and more than 2000 references installed
worldwide (60 countries), EMO is a leading Designer and Manufacturer
of sludge treatment installation including thickening, dewatering and
drying.
The OMEGA Belt Filter Press is designed for the continuous
mechanical dewatering of municipal and industrial sludge.
With its in-house, well equipped laboratory, EMO has been able to
characterize many kinds of sludges and deliver tailor-made solutions
for the benefit of the end-user.
EMO does not only provide electromechanical equipment but
engineering and process solution thanks to the expertise of its
Chemical & Process Engineers.
Operating principle
E.M.O. s.as.
Sludge beforehand conditionedto allow its dewatering arrives on the upper part of the equipment by means of a sludge inlet
flange. The sludge divides up on the filtering belt in a uniform way. The water contained in the sludge gets through the
filtering belt and is then channelled in a tank. Plows arranged on the thickening zone create grooves in the sludge to ease
the evacuation of the water.
The sludge is then poured on a filtering belt having a finer meshing to allow the pressing.
The second filtering belt of pressing comes to imprison gradually the sludge to evacuate residual water. After passage
between rollers of various diameters to increase the pressing, the sludge is unstuck from the filtering belt and pours in the
system of evacuation (thickened sludge pump, screw conveyor, …).
Sludge inlet
flange
Belt tensioning
rollers
Washing spraybar
for upper belt
Washing spraybar
for lower belt
Integrated
botton frame
Hold of side
lock
Active scraper blade
on filtering belt and
not on roller
Fixed roller to
improve
waterproofness
Row of blades to
improve sludge
distribution
Support for
blades to
increase
filtration
efficiency
Pressing roller in
intermediate zone + row of
ploughs to recenter the
sludge
Selection tables
Note that this combined unit is selected according to the DS loading rate per hour and per belt meter width. The rate varies
from one type of slduge to the other.
Model Belt width Dimensions ( l x w x
h)
Sludge flowrate
GPM
OMEGA CC 060 0.60 meter 9’ -3’’ x 4’ -2’’ x 7’ -1’’ 25
OMEGA CC 120 1.20 meters 9’ -3’’ x 6’ -1’’ x 7’ -1’’ 53
Contact EMO for equipment selection with many information as possible on the
sludge characteristics.